40.5*21*15mm

9g

5V

2S LiPo battery

Charging Mode, Balance Mode, Repair Mode

0.02V

Max. 4.2V for each battery cell

1.5A

0.8A

20W

USB Type-C input

3P XH2.54 port

① All green LEDs flash once: all green LEDs will flash once when the charger is powered on, indicating that the calibration has been done.

② The red LED is always on: when the charger is powered on and no battery is connected, the red LED is always on means the charger is waiting for the battery to be connected.

③ The first green LED flashes: the battery voltage is less than 7.4V.

④ The first green LED is always on, and the second green LED is flashing: the battery voltage is greater than 7.4V and less than 7.8V.

⑤ The first and the second green LEDs are always on, and the third green LED is flashing: the battery voltage is greater than 7.8V and less than 8.2V.

⑥ The first three green LEDs are always on, and the fourth green LED is flashing: the battery voltage is greater than 8.2 and less than 8.4V

⑦ All four green LEDs are always on: the battery is fully charged.

⑧ The red LED flashes during charging: the charger detects an abnormal state.

Dimension: 

Weight:

Input Voltage: 

Supporting Battery: 

Working Modes: 

Charging Precision: 

Charging Voltage: 

Charging Current: 

Balance Current: 

Max. Output Power: 

Power Supply Input Port: 

Charging Port Interface:

Status Prompt:

• Specification