- FC SYSTEM
FC for Fixed Wing
GPS
RTK Kit
12C Boards
Ultrasonic Sensor
Digital Video
Transmission Adapter Board
Flight Controller(Mission Planner)
NEW
- RECEIVER
Receivers - compatible with AT10II, AT10, AT9S Pro, AT9S, AT9
Receivers - T16D, T12D, T8FB, T8S; RC8X, RC8P, RC6GS V3, RC4GS V3, RC6GS V2, RC6GS, RC4GS V2, RC4GS
Telemetry Module
ELRS Receiver
NEW
简体中文
English
FAQ
Q: What receivers are compatible with RC8P?
Q: What receivers are compatible with RC8P?
A: RadioLink R8FG(Standard), R16F, R16SM, R12F, R8FGH, R8EF, R8FM, R8SM, R8XM, R7FG, R6FG, R6F, and R4FGM.
Q: What is the control range of RC8P?
Q: What is the control range of RC8P?
A: RC8P comes with R8FG receiver, which supports about 600 meters control range on the ground. (Maximum range tested in unobstructed areas free of interference)
Q: How many models can RC8P store?
Q: How many models can RC8P store?
A: 30.
Q: Does RC8P support ELRS module?
Q: Does RC8P support ELRS module?
A: No.
Q: Does RC8P support the left hand?
Q: Does RC8P support the left hand?
A: No.
Q: Is RC8P compatible with 4 in 1 Protocol?
Q: Is RC8P compatible with 4 in 1 Protocol?
A: No. RadioLink control system is not open-sourced. All RadioLink transmitters are only compatible with RadioLink receivers.
Q: Does RC8P support dual motor/ESC control?
Q: Does RC8P support dual motor/ESC control?
A: Yes. Please set the programmable mix on RC8P. Please refer to Chapter 2.20 of the manual for details on how to set programmable mix:
https://www.radiolink.com.cn/rc8p_user_manual
Q: Does RC8P support FPV display or an external monitor?
Q: Does RC8P support FPV display or an external monitor?
A: No.
Q: Does RC8P support firmware updates via Bluetooth?
Q: Does RC8P support firmware updates via Bluetooth?
A: No. Firmware updates can only be performed via a USB connection. Please refer to Chapter 3 of the manual for the firmware update methods:
https://www.radiolink.com.cn/rc8p_user_manual
Q: Does RC8P support adjusting the tension of the throttle trigger and steering wheel?
Q: Does RC8P support adjusting the tension of the throttle trigger and steering wheel?
A: No.
Q: How to calibrate the steering/throttle/VR knob of RC8P?
Q: How to calibrate the steering/throttle/VR knob of RC8P?
A: Please refer to the tutorial: https://www.youtube.com/watch?v=_6c3HnVPI88
Q: How to replace the steering wheel of RC8P?
Q: How to replace the steering wheel of RC8P?
A: Please refer to the tutorial: https://www.youtube.com/watch?v=rcrYELjtHSw
Q: Does RC8P support firmware updates via mobile phone?
Q: Does RC8P support firmware updates via mobile phone?
A: No. You need to use a computer to copy the firmware to the disk of RC8P and then update the firmware on RC8P. Please refer to the tutorial to update the firmware:
https://www.youtube.com/watch?v=j0kLmJ62wHA
Q: How to make customized switch voice on RC8P?
Q: How to make customized switch voice on RC8P?
A: Please refer to the tutorial: https://www.youtube.com/watch?v=j7Em6ZpOQA4
Q: How to set END POINTS function on RC8P?
Q: How to set END POINTS function on RC8P?
Q: How to set CONDITION function on RC8P?
Q: How to set CONDITION function on RC8P?
Q: How to bind different receivers to RC8P?
Q: How to bind different receivers to RC8P?
Q: How to set PROGRAMMABLE MIX function on RC8P?
Q: How to set PROGRAMMABLE MIX function on RC8P?
Q: How to set the trainer function of RC8P?
Q: How to set the trainer function of RC8P?
A: There are two methods to use the trainer function for RC8P. One is to connect via trainer cable and the other is to connect via RadioLink wireless trainer cable. Please refer to the tutorial below:
RC8P trainer function with trainer cable connection:
https://www.youtube.com/watch?v=76KE9qaFp3E
RC8P trainer function with wireless trainer cable connection:
https://www.youtube.com/watch?v=FAm5bwp1h-8
Q: Is it possible to use the DL1 or VR knob to adjust the throttle output?
Q: Is it possible to use the DL1 or VR knob to adjust the throttle output?
A: No, but you can assign a switch to change different throttle output values. Here is the tutorial:
https://www.youtube.com/watch?v=QeCXOTD6ELg
By the way, the channel hold function of RC8P can set the throttle output to a fixed value.
