RC6GS V3 VS RC6GS V2

RC6GS V3 VS RC6GS V2
Contents RC6GS V3 RC6GS V2
Transmitter Chip ARM M4 ARM M3
Channels 7 channels 6 channels
Model Storage Quantity support 30 models storage support 10 models storage
FPV Head Track Function Yes, can be set the FPV Head Track Function(3-axis or 2-axis track can be selected) in the DSC menu Yes, but must upgrade the dedicated firmware(V6.3.2) for FPV Head Track Function, have not dedicated menu to set
Timer Function Yes No
D/R Switch A switch can be set to switch D/R cannot set a switch
Dual Mix Programmable

A switch can be set to turn on

or turn off PMIX01 and PMIX02

cannot set a switch
Low Voltage and RSSI Alarm

low voltage and RSSI alarm can be

set independently for each model

10 models can not set independently
DSC Port

DSC menu: is default the Simulator Function,

can be set as FPV Head Track Function(3-axis or 2-axis track can be selected),

or TBS Crossfire Function

do not have the DSC menu: is default the Simulator Function, can be set as FPV Head Track Function(by connect the trainer cable to the DSC port) or TBS Crossfire Function(by connect the TBS Crossfire to the DSC port)
 
Control Distance

600m(1968.5ft) (Maximum range tested in

unobstructed areas free of interference)

TBS Crossfire Function

compatible with TBS Crossfire by connect

the TBS Crossfire to the DSC port

Telemetry

Support signal, RSSI, transmitter voltage, receiver voltage and

maximum 8S (33.6V) model battery voltage telemetry

Cruise Control System Support
Gyro Integrated Support, HV Servo Supported
Subsidiary ID Support maximum 10 binding receivers
Antiplug Protection Support
USB Upgrade Support
Compatible Receivers R8F, R8EF, R7FG, R6FG, R6F, R4FGM, R4F